Sentinel Dual SDL

  • Unavailable
sentinel dual sdl online ups, 4000 VA

Zener Sentinel Dual SDL online UPS
Summary
Topology: Online Double Conversion
Power Range: 4000 VA
Input/Output: 1:1
Installation Type: Desktop, Convertible
Isolation: Transformer-less
Battery: Internal or External (1)
Features
Rackmount or tower installation
Low noise level (less than 40 dBA)
Easy installation (Plug & Play)
Easy hot-swap internal battery replacement
User friendly LCD display
Monitoring via network feature (2)
Originality Guarantee
Guarantee Terms
Support & Service
Estimation of required power
The Sentinel Dual SDL UPS is the best choice for powering sensitive consumers such as medical, laboratory and emergency equipment with a high degree of reliability; Online double conversion technology used in this UPS allows consumers to be fed without interruption with full sinusoidal output and stabilized voltage and frequency. Operation in Online, Economy, Smart active, Emergency and Frequency converter modes has been performed at the user's choice using the front panel of the device, making this UPS desirable for a variety of applications. The special design of this UPS with the possibility of rotating the screen, has made it possible to install it in two ways or in a standard rack (along with the equipment installed in the rack).

Click for more information...

Thanks to the use of Hot-swap technology in this UPS, the replacement of internal batteries can be done without the need for blackouts or interruptions in consumer power supply. Two standard IEC 320 C13 outputs and one IEC 320 C19 standard output are provided for higher currents. USB and RS-232 serial ports and slots for communication equipment such as the NetMan 204 module are located on the back panel of the UPS. An emergency shut-off terminal is installed on the back of the UPS that can be connected to the switchboard to cut off the UPS output immediately if necessary. (1) It is possible to provide External battery box in accordance with the body of the device if ordered.
(2) UPS monitoring under TCP/IP protocol requires NetMan 204 module and under Modbus/Jbus protocol requires MultiCOM 302 module.
Zener UPS Sentinel Dual SDL LCD display
The Sentinel Dual SDL UPS is suitable for home, office, data center, computer networks, laboratory medical equipment, industrial plants, transportation and navigation equipment, and safety and security systems. Please contact the sales department of Zener Engineering Company to find out the inventory, receive the price list and purchase the various capabilities of this UPS.
Downloads
Collapse All
Expand All
File Name Volume Update
An Adobe Acrobat file Sentinel Dual SDL UPS persian brochure
690.08 kB
2021-01-20
Software and Accessories
PowerShield3 UPS and ATS monitoring software
PowerShield3 Monitoring Soft.
UPS/ATS monitoring software
PowerNetGuard UPS monitoring software
PowerNetGuard Monitoring Soft.
UPS remote monitoring software
NetMan 204 UPS and ATS monitoring module
NetMan 204 Module
UPS/ATS remote monitoring
MultiCOM 302 module
MultiCOM 302 Module
Modbus/Jbus protocol converter
MultiCOM 352 module
MultiCOM 352 Module
Serial port extender
MultiCOM 372 module
MultiCOM 372 Module
Contact, serial port extender
MultiCOM 384 module
MultiCOM 384 Module
Relay contacts
Multi I/O module
Multi I/O Card Module
Relay contacts, protocol converter
MultiCOM 411 module
MultiCOM 411 Module
Profibus remote monitoring
MultiPanel remote monitoring display
MultiPanel Remote Display
Remote monitoring display
Environmental Sensor
Environmental Sensor
Environmental sensor
Technical Specification
UPS
UPS Model
Input Spec.
Nominal Input Voltage 220, 230, 240 VAC single phase
Input Voltage Range min 92 VAC @ 50% load, 184 VAC @ 100% load
Input Frequency Range 50 or 60 Hz (tolerance ±5% auto sensing)
Input Power Factor > 0.95 (full linear load)
Inlet 1 × IEC 320 C20
Bypass Spec.
Bypass Voltage Range 180 to 294 VAC single phase
Bypass Frequency Range Frequency selected ±5%
Output Spec.
Output Power - select a model from top -
Nominal Output Voltage 220, 230, 240 VAC single phase (selectable)
Output Voltage Range 230 VAC ±20%, Static variation ±1.5%, Dynamic variation ≤ 5% in 20 ms
Output Frequency Range 50 or 60 Hz selectable
Output Power Factor 0.6
Output Voltage Distortion (THDu) < 3% with linear load, < 6% with non-linear load
Output Wave form Sinusoidal
Efficiency up to 98% in Line-interactive and smart active modes
Outlet 2 × IEC 320 C13 + 1 × IEC 320 C19
Battery Spec.
Type of Battery Internal batteries or external batteries
No. × Voltage 9 × 12 VDC = 108 VDC
Recharging Time < 4 hours to 80%
Protections
Overload 100% < Load < 110% for 1 minute, 110% < Load < 150% for 4 seconds, more than 150% for 0.5 second
Protections Over-current, short-circuit, over-voltage, under-voltage, over-temperature, excessive low battery
Alarms Line failure, battery low, over-load, fault conditions
Physical Spec.
Dimensions (W × D × H) 483 × 520 × 175 mm (4U)
Weight 40 kg (with internal battery)
Environmental Conditions
Working Temperature Ambient: min 0 °C, max 40 °C, Recommended for battery life: 20 to 25 °C
Working Humidity max 95% non-condensing
Altitude Level 1000 m @ nominal power (Derating 1% power for every 100 m above 1000 m, max 6000 m)
Noise Level max 40 dBA @ 1 m (in ECO mode)
Other Features
Communications USB, DB9 with RS-232 and contacts, slot for communications interface, EPO
Standards EN 62040-1 EMC EN 62040-2 Directives 2014/35/EU - 2014/30/EU EN 62040-3
Ask about this product

Sales and Marketing Department

Ready to register your purchase requests.
Phone Call
+9821 66 72 3972 (Ext.1)
Whatsapp
+98 919 468 3960
Email us
sales@zenerco.com
Zener engineering company (PJS), founded in 1981 is among the most experienced companies in the power and electronics field in Iran. We offer a wide range of products in the field of generating electric power including online, offline and line-interactive UPS both single and three-phase from home and office to medical and industrial applications, sealed lead acid batteries, automatic transfer switch (ATS), monitoring systems, environmental sensors and related accessories. Zener Eng. Co. provides optimal technical support in order to create the best possible customer satisfactory regarding the uninterrupted function of its equipment. This is achieved using over 60 trained personnel. Our colleagues in sales and marketing department and after sales services department are trained to give our valued customers consultation in finding the most suitable products for their need, design and execution of uninterrupted electrical systems while providing special solutions. In addition to manufacturing single and three-phase UPS, sealed lead acid batteries both with Zener brand, Zener engineering company is official and exclusive agent for Riello UPS (from Italy), Ablerex UPS (from Taiwan), Rocket and Newmax batteries (from South Korea), Interberg batteries (from Spain) and Starway batteries (from China).
All rights reserved
COPYRIGHT © 2024
Design by: Hamrad Gostar Asia Technology Development

This site uses cookies. By click on "I agree" or continuing to browse our website, you agree to our website terms and privacy policy.

Click here for more information.

I agree