Master Industrial UPS

  • Unavailable
master industrial online ups, 30 to 80 kVA

Zener Master Industrial online UPS
Summary
Topology: Online Double Conversion
Power Range: 30 to 80 kVA
Input/Output: 3:1
Installation Type: Tower
Isolation: UPS + Transformer-less
Battery: Only External (1)
Features
UPS with 220 V DC bus
Input and output isolation transformer
Full compatible with industrial environment
High short-circuit current (ICC = 3)
User friendly LCD display
Monitoring via network feature (2)
Originality Guarantee
Guarantee Terms
Support & Service
Estimation of required power
UPS Master Industrial provides maximum protection for systems and equipment in industrial plants, manufacturing, petrochemical industries, power distribution and power plants. Master Industrial is an online topology UPS compliant with IEC EN 62040-3 and VFI-SS-111 and equipped with isolated transformers at the input and output. This UPS is an ideal option for working in harsh and unfavorable environmental conditions; The normal operation of the UPS under conditions of vibration, mechanical stress, dust and harsh environmental conditions is largely guaranteed. Thanks to the high capacity of short circuit current, loads with high instantaneous currents such as motors, compressors, etc. are fed without damaging the output voltage of the UPS.

Click for more information...

The feature of power expansion or increase of system reliability (Redundancy) is available by parallelizing up to 8 UPS devices. (3) User-friendly LCD display displays the values of different device parameters well. With RS-232 serial port, remote emergency terminal (EPO) and two slots for communication equipment such as NetMan 204 module, parallel card slot, Multi I/O card slot and relay contacts, any possible connection to this UPS is well predicted. The Maintenance Bypass switch is located in this UPS to transfer the power supply of consumers from the inverter to the main input power without any interruption. This UPS comes with IP20 protection by default; It is possible to increase the permeability coefficient to IP31 and IP42 if ordered.
(1) It is possible to order a battery box compatible with the body of the device.
(2) UPS monitoring under TCP/IP protocol requires NetMan 204 module and under Modbus/Jbus protocol requires MultiCOM 302 module.
(3) In order to perform the Parallel operation, a parallel card with the corresponding connections must be provided for each UPS.
Master Industrial UPS is suitable for use in data centers, computer networks, laboratory medical equipment, transportation and navigation equipment, industrial plants and safety and security systems. The selling price of this UPS varies depending on the model and power requested. Please contact the sales department of Zener Engineering Company to find out the inventory, receive the price list and purchase the various capabilities of this UPS.
Downloads
Collapse All
Expand All
File Name Volume Update
An Adobe Acrobat file Master Industrial UPS persian brochure
817.2 kB
2021-01-20
Software and Accessories
PowerShield3 UPS and ATS monitoring software
PowerShield3 Monitoring Soft.
UPS/ATS monitoring software
PowerNetGuard UPS monitoring software
PowerNetGuard Monitoring Soft.
UPS remote monitoring software
NetMan 204 UPS and ATS monitoring module
NetMan 204 Module
UPS/ATS remote monitoring
MultiCOM 302 module
MultiCOM 302 Module
Modbus/Jbus protocol converter
MultiCOM 352 module
MultiCOM 352 Module
Serial port extender
Multi I/O module
Multi I/O Card Module
Relay contacts, protocol converter
MultiCOM 411 module
MultiCOM 411 Module
Profibus remote monitoring
MultiPanel remote monitoring display
MultiPanel Remote Display
Remote monitoring display
Environmental Sensor
Environmental Sensor
Environmental sensor
Parallel kit
Parallel Kit
Parallel kit
Isolation transformer
Isolation Transformer
Isolation transformer
Technical Specification
UPS
UPS Model
Input Spec.
Nominal Input Voltage 380, 400, 415 VAC three phase
Input Voltage Range 400 VAC ±20% @ full load
Input Frequency Range 50 or 60 Hz tolerance ±2% (selectable from ±1% to ±5%)
Input Power Factor > 0.93 (full linear load)
Input Voltage Distortion (THDi) < 6%
Inlet Terminal block
Output Spec.
Output Power - select a model from top -
Nominal Output Voltage 230 VAC single phase
Output Voltage Range 230 VAC, Static variation ±1%, Dynamic variation ±5%
Output Frequency Range 50 or 60 Hz selectable
Output Power Factor 0.8
Output Voltage Distortion (THDu) < 1% with linear load, < 3% with non-linear load
Output Wave form Sinusoidal
Efficiency up to 94% in online mode
Outlet Terminal block
Battery Spec.
Type of Battery Only external batteries
No. × Voltage 220 VDC
Protections
Overload 100% < Load < 110% for 60 minutes, 110% < Load < 125% for 10 minutes , 125% < Load < 150% for 1 minutes
Protections Over-current, short-circuit, over-voltage, under-voltage, over-temperature, excessive low battery
Alarms Line failure, battery low, over-load, fault conditions
Physical Spec.
Dimensions (W × D × H) - select a model from top -
Weight - select a model from top -
Environmental Conditions
Working Temperature Ambient: min 0 °C, max 40 °C, Recommended for battery life: 20 to 25 °C
Working Humidity max 95% non-condensing
Altitude Level 1000 m @ nominal power (Derating 1% power for every 100 m above 1000 m, max 6000 m)
Noise Level 68 to 70 dBA @ 1 m (in ECO mode)
Other Features
Communications Double RS-232 + dry contacts + 2 slots for communications interface
Standards European directives: L V 2014/35/EU low voltage Directive EMC 2014/30/EU electromagnetic compatibility Directive Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2; RoHS compliant Classification in accordance with IEC 62040-3 (Voltage frequency Independent) VFI - SS - 111
Ask about this product

Sales and Marketing Department

Ready to register your purchase requests.
Phone Call
+9821 66 72 3972 (Ext.1)
Whatsapp
+98 919 468 3960
Email us
sales@zenerco.com
Zener engineering company (PJS), founded in 1981 is among the most experienced companies in the power and electronics field in Iran. We offer a wide range of products in the field of generating electric power including online, offline and line-interactive UPS both single and three-phase from home and office to medical and industrial applications, sealed lead acid batteries, automatic transfer switch (ATS), monitoring systems, environmental sensors and related accessories. Zener Eng. Co. provides optimal technical support in order to create the best possible customer satisfactory regarding the uninterrupted function of its equipment. This is achieved using over 60 trained personnel. Our colleagues in sales and marketing department and after sales services department are trained to give our valued customers consultation in finding the most suitable products for their need, design and execution of uninterrupted electrical systems while providing special solutions. In addition to manufacturing single and three-phase UPS, sealed lead acid batteries both with Zener brand, Zener engineering company is official and exclusive agent for Riello UPS (from Italy), Ablerex UPS (from Taiwan), Rocket and Newmax batteries (from South Korea), Interberg batteries (from Spain) and Starway batteries (from China).
All rights reserved
COPYRIGHT © 2024
Design by: Hamrad Gostar Asia Technology Development

This site uses cookies. By click on "I agree" or continuing to browse our website, you agree to our website terms and privacy policy.

Click here for more information.

I agree